• PRODUCTS
• PROGRAMS
• DISTRIBUTORS
• ABOUT COMPANY
• REFERENCE
• HOME

• Description
• Specification
• Transmitter types
• Accessories

! New generation - preliminary parameters - available from June 2005 !

Temperature probes and transducers for Pt1000/3850ppm sensor with 4-20mA output for two-wire connection are built in a durable watertight case. Output temperature range is user adjustable. Large dual line LCD is an advantage. Display is possible to switch off. Computerized design ensures maximum long term stability and fail indication.

APPLICATIONS - measuring and control of temperature at:

• warehouses
• glasshouses
• manufacturers
• museums, archives, galleries
• air-conditioned rooms
• weather stations

COMMON TECHNICAL PARAMETERS
Accuracy of temperature output of T0110 probe:	±0.4°C
Accuracy of temperature output of T4111 transducer:	±0.2°C from -100 to +100°C ±0.2% from reading outside of this range
Temperature operating range:	-30 to +80°C
Temperature operating range of LCD display:	readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Current output - two-wire connection:	4-20mA
Output temperature range:	user adjustable from the PC
Protection:	IP65 electronics
Power:	9-30Vdc
Warranty:	two years

Transducers are available in the following types:

Type	Measured value	Maximum range of measured temperature	Output	Note
T0110	temperature	-30 to +80°C	-30 to +80°C	outdoor and indoor
T4111	temperature	-200 to +600°C	-200 to +600°C	transducer for Pt1000/3850ppm probes, output range adjustable by the user

Outputs are adjusted to maximum range from the manufacturer. Output range is user adjustable from the PC by means of the optional cable - see below. Free configuration program is ready to download from www.cometsystem.cz. If different adjustment of temperature output range is required, please specify required output range. Minimum full scale is 30°C.

Ordering example: Transmitter T4111, output -100 to +30°C

Included accessory:

Calibration certificate from the manufacturer.

OPTIONAL ACCESSORY
	SP003	cable for transmitter adjustment via USB port
	probes	temperature probes with Pt1000 sensor without connector - probe marking is followed by symbol /0. Recommended is multi-purpose watertight probe Pt1000TG8/0 available with cable lengths 1, 2, 5, 10m

Transmitters are directly compatible with sixteen channel Comet monitoring systems MS2+, MS3+, MS4+.